Satin Finishing Plaster 25KG

Application of Satin Finishing Plaster

Preparation and Application:
The surface to be applied should be cleaned of dust and any substances that may prevent adhesion. Pour a sufficient amount of water into a clean container. Satin Finishing Plaster is sprinkled until it covers the water surface. Let it sit for a few minutes, then mix until the plaster reaches a homogeneous consistency. Once mixed, the plaster is ready for use. The prepared plaster can be used for approximately 120 minutes. The application is done with a steel trowel.

Recommendations:

• Do not mix Satin Finishing Plaster with any other materials.
• If using a mechanical mixer, use it at low speed.
• Do not add water or plaster after mixing.
• The application environment should have a temperature of at least +5°C.

Storage Conditions:

• Do not stack more than 20 bags.
• It is recommended to store Satin Finishing Plaster in a dry, moisture-free, and enclosed environment on pallets and use it within 1 year.
• Poor storage conditions or exceeding the recommended usage time may affect the quality of the product.