Ir a contenido
Orders Profile
LIQUID GLASS

LIQUID GLASS

por Costa Material
₡ 0,00 - ₡ 0,00
Register/login for Price
₡ 0,00 - ₡ 0,00
Agotado

It is a transparent, two-component product used for waterproofing and decorative purposes, offering excellent adhesion to surfaces such as glass, mosaic, tiles, porcelain, ceramic, marble, granite, natural stone, wood, concrete, screed, galvanized sheet, aluminum, etc. It has high resistance to atmospheric conditions, provides excellent water resistance as well as high chemical and physical durability.
It is UV-resistant and unaffected by outdoor weather conditions. It does not yellow, fade, or peel over time. It can be easily applied without damaging or removing existing покрытия and is especially effective in solving waterproofing problems on floors such as balconies, terraces, and bathrooms.

Technical Properties

  • Density A component (25°C, g/mL): 0.90 ± 0.10

  • Density B component (25°C, g/mL): 0.95 ± 0.10

  • Viscosity B component (25°C, mPa·s): 0 – 500

  • Water transmission rate (kg/m²·h⁰·⁵): < 0.1 – Class W3

  • Adhesion strength by pull-off test (N/mm²): Rigid system, no traffic load ≥ 1.0 N/mm²

  • Water vapor permeability (m): 5 ≤ SD ≤ 50 – Class II

  • Pot life (23°C): 50 – 60 minutes

  • Solvent: Organic solvent

Areas of Use

  • Glass, glass blocks, mosaic, mosaic tiles

  • Tiles, ceramics, marble, granite, natural stone, porcelain surfaces

  • Pressed bricks

  • Wooden surfaces

  • Balconies, terraces, bathrooms, kitchens, stone-clad exterior facades

  • Decorative pools with ceramic or glass mosaic coating

  • Helps prevent dusting on absorbent surfaces

Surface Preparation

  • Relative humidity max. 80%, ambient temperature 15–35°C, surface temperature min. 5°C

  • Do not apply outdoors during rainy weather

  • Surface must be thoroughly cleaned for good adhesion

  • All oil, dust, dirt, rust, and similar contaminants that may prevent adhesion must be completely removed

  • If grout joints on tile or ceramic surfaces are worn, they should be renewed

  • Sanded surfaces provide better mechanical properties and improve adhesion

Application Method

  • Before application, the two components must be thoroughly mixed by weight in the specified ratios

  • Proper and uniform mixing is essential for the desired reaction

  • Waiting time between coats: 4–24 hours (at 20°C)

  • Recommended application:

    • 2 coats on concrete and raw wood

    • 1 coat on marble, granite, tiles, ceramics, sheet metal, and metal surface